shot blasting machine ၏ဘုံပြproblemsနာများဥပမာ

2021-06-05

ကျွန်ုပ်တို့၏ယခင်နားလည်မှုနှင့်နက်ရှိုင်းသောနားလည်မှုမှတဆင့်ပစ်ခတ်မှုပေါက်ကွဲမှုစက်, there will still be some novices who do not fully understand the ပစ်ခတ်မှုပေါက်ကွဲမှုစက်. At the same time, it is also popularized based on what we have not mentioned before. The following are some examples of our problems and polishing The technical requirements for shot blasting of the ပစ်ခတ်မှုပေါက်ကွဲမှုစက်, etc., I hope you will learn something and strengthen your own practical deficiencies.
ပစ်ခတ်မှုပေါက်ကွဲမှုစက်ပရော်ဖက်ရှင်နယ်ရှုထောင့်မှကြည့်လျှင်၎င်းစက်သည်မည်သည့်စက်ဖြစ်သည်။ စက်ရုံတစ်ရုံ၏ထုတ်လုပ်မှုနှင့်ပြုပြင်ထုတ်လုပ်သည့်စက်ရုံကိုမည်သို့ရွေးချယ်ရမည်နည်း။

The ပစ်ခတ်မှုပေါက်ကွဲမှုစက် itself is a surface treatment equipment, dedicated to solve the problem of imperfect surface of metal objects, and can remove the rust layer, rust spots, oxidation, painting, renovation, etc. on the surface of metal objects. For the foundry industry, performance, stability and quality should be considered when choosing a ပစ်ခတ်မှုပေါက်ကွဲမှုစက်. Secondly, considering the price, because there are more ပစ်ခတ်မှုပေါက်ကွဲမှုစက်s in the market, you can choose to shop around. Only then can there be price comparisons.

၂ ။ အဓိကရှုထောင့်ကဘာတွေလဲ။

အချက်တစ်ချက်မှာပြtheနာဖြစ်သည်ပစ်ခတ်မှုပေါက်ကွဲမှုစက် itself. On the basis of shot blasting technology, the ပစ်ခတ်မှုပေါက်ကွဲမှုစက် must be stable enough, and what kind of ပစ်ခတ်မှုပေါက်ကွဲမှုစက် is used for example: steel shot, iron shot, aluminum shot , And what is the size of the pellets, and then what is the ejection speed when we shot blasting. The professional name is called ejection flow. Different shot blasting intensities have different throwing effects, and the efficiency will be corresponding. Get the same change.

3. What should I do if the ပစ်ခတ်မှုပေါက်ကွဲမှုစက် misses the shot? How to solve it?
အကယ်ပစ်ခတ်မှုပေါက်ကွဲမှုစက် is in use, it is likely to be caused by the shape of the workpiece, but this is not an absolute factor. Usually, there will be more probability at the exit of the ပစ်ခတ်မှုပေါက်ကွဲမှုစက်. According to this point, we will cause Pay attention, and deal with the missing blasting material at any time during the working time, so as not to form a pile, so as not to affect the normal shot blasting progress.
The above three points are reference for common problems of ပစ်ခတ်မှုပေါက်ကွဲမှုစက်s, which are very useful for production and processing manufacturers. According to strict production, the shot blasting effect will not be bad, so we must also think from a comprehensive perspective in order to achieve ourselves The expected effect.

  • QR
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy